AT.S7 matt paint for interior. Matt water dispersion paint based on styrene-acrylic latex for interior work. It has good application characteristics and strong adhesion to the base, it does not drip when applied, without
a strong smell, safe for human health and the environment. Creates durable, wear-resistant, water-resistant, vapor permeable coating that is resistant to the action of detergents and disinfectants. Formed coating can withstand wet cleaning.
The surface to be painted should be dry, plain, and well cleaned from dust, limestone, chalk, grease, or other materials that decrease adherence to the surface. It is recommended to remove the remains of the poorly stuck coat.
Remove old exfoliated coating from the surface with a scraper or sand blower. Priory painted surfaces that have not exfoliated from the base should be washed with water and soap, cleanser or 3% soda solution and rinse with clean water. After washing, rough
up the surface with abrasive paper and remove dust. Surfaces affected by fungi or other biological contamination should be cleaned with the help of eliminator of microorganisms and fungi. Smoothen cement surface variances with AT paste filler. We recommend
using coarse-grained AT MAC paste filler for the first layer and fine-grained AT MIC paste filler for the finishing cementing. It is recommended to cement cracks and cavities of the base with reinforcing AT.T paste filler. After drying, grind the surface and
SURFACE PAINTING AND CARE
Before use and during the work the paint should be thoroughly mixed until smooth. Paint 1-2 times with a brush, roller or using the technique of airless spraying. For mechanized
painting, it is recommended to use an airless high-pressure spray gun GRACO according to the operation instruction. When spraying paint, it may be diluted with clean water (up to 5% by volume), if necessary. When painting walls, apply the paint to the surface
first with horizontal movements, and smoothing brush strokes should be applied from the bottom up. During painting, the temperature of the treated surface and the environment should be above +8 ºC, and relative humidity should be in the range of
35-80%. Too high temperature of the environment and the draft may cause the formation of the defective paint film. Wash tools with water immediately after completion of the work.
To clean surfaces mackled during execution of works, use clean water and
natural or slightly alkaline cleaning agents. Do not use cleaners containing organic solvents. Under normal conditions, a film of latex paint reaches its ultimate strength within 4 weeks after painting, so before the expiry of the mentioned period avoid intense
cleaning of the surface.
Binder – water styrene acrylic copolymer dispersion.
Colour – white or tinted. To make the desired colour the paint is tinted with COLTEC B organic pigment
pastes per the Catalog of colours NCS, RAL, Nova, Spirit S286, Moodscapes. A selection of colour according to the customer’s sample is possible.
Density – about 1.37 g/cm3
Drying time at +20 ºC and relative humidity
– 1 hour from dust;
– 2 hours for refinishing.
At lower temperatures, the drying time increases.
Resistance to wet abrasion - Class 1 as per EN 13300 (2.6 μm after 200 cycles)
The wet cleaning of the
surface may be performed 1 month after painting.
Consumption: 6-8 l/m2 with the two-layer coating.
Consumption of paint depends on the properties of a specific surface, its roughness and absorbency. To accurately determine the consumption
of paint it is recommended to perform trial coating.
Content of volatile organic compounds (VOCs):
Subcategory: (A/a/WB according to Directive 2004/42/EB)
VOC limit value: 30 g/l (2010)
VOC content in the ready for use paint AT.S7
< 29 g/l
Storage conditions: Store in a dry place in a tightly closed container at a temperature of +5 ºC to +25 ºC. Protect from frost, intense heat, and direct sunlight.
Guaranteed shelf life of the product in the original
container of the manufacturer – 12 months from the date of manufacture indicated on the label.
Conditions of transportation: Protect containers from damage and frost.